Fluorosilicone Rubber Base HFS-HR-1000ET
(HTV Homopolymer for Extrusion)

Major Composition：Fluorosilicone homopolymer raw gum and flumed silica

Feature：
· For Extrusion
· Excellent oil resistance and outstanding apolar solvent resistance
· Retains properties over a wide temperature range of -60-230℃
· Easily Processed and easily pigmented

Typical Properties*：

*Properties obtained using1phr heat resistance additive HFS-A-06 and 1.5 phr bis 2,4-Dichlorobenzoyl peroxide (DCBPO) on 1.91mm slabs; molded 15 minutes at 105℃; post-cured 4 hours at 200℃. When it is extruded, the temperature and time for first cure and post cure shall be adjusted according to actual process. This product can be blended with fluorosilicone rubbers of other durometers to produce materials with any intermediate durometers between 40 to 80.
Applications：
· This product is suitable for extrusion application.
· Suitable to produce pipes, sealing stripes, and special-shaped parts for contacting petroleum oil, lubricant oil, hydraulic oil, and apolar chemical reagents in low temperature and/or high temperature enviroments
· Mainly used in automobile industry, aerospace industry, petroleum chemical industry and military industry.
Package and Shipment:
· It is available in 12.5Kg per plastic bag and two bags in one carton
· It is shipped as non-dangerous goods. The product can flow because of its own gravity, so is shall be properly packaged to avoid any leakage. If it is leaked, please dispose it as non-dangerous goods.
Storage：
· It shall be stored in a dry ventilate place and its shelf life is one yea.
· It shall be stored in a neutral ventilate place to avoid contact with acidic or alkalic substances.